Commercial, Mixed-Use and Strata Roof Maintenance in Vancouver, B.C.

How To Fix Roof Leaks In Heavy Rain? (STEP-BY-STEP GUIDE)

How To Fix Roof Leaks In Heavy Rain? (STEP-BY-STEP GUIDE)

Fixing roof leaks in heavy rains or after a rainstorm is tough. Even for professional roofers. So, what do you do when your roof starts leaking on a rainy day? How To Fix Roof Leaks In Heavy Rain

To stop a leak during a rainstorm, you need to first identify the origin of the leak. Then use a bucket or container to collect the dripping water. You can either cover the leak with a plastic trap or seal it. This should contain the leak till your roofer arrives.

However, doing all this is not as simple as it seems. There are plenty of other factors to consider. Therefore, below I have elaborated the entire process in a step-wise manner. You will also find the minor details involved in each step of the process.

Steps: How To Fix Roof Leaks In Heavy Rains

Step 1: Identify The Source Of Leaks. (How To Fix Roof Leaks In Heavy Rain)

Things/Tools You’ll Need: A flashlight, a ladder if need be.

 This can be difficult during heavy rains but start by locating the root of the leak. There are plenty of components of the roofing system that are affected by the constant downpour. You can check out this article to find the cause of your roof leak.

The chimneys, skylights, plumbing, vents, gutters, and solar panels, are most vulnerable to water. As the probability of cracks or bends is more around these places. Other causes could be condensation in the attic or a damaged roof. If you have a metal roof, then corrosion can lead to roof leaks too.

Finding the source of the leak will help you assess the damage and take preventive measures.

Keep in mind: That getting on the roof may be dangerous during the rains. 

Step 2: Contain The Leaking Water. (How To Fix Roof Leaks In Heavy Rain)

 Things/Tools You’ll Need: A mop, A bucket/ container big enough to hold the water.

Once you’ve identified the source, it’s time to stop the water. Get your furniture away from the leaking area. Put a container under the leak.

Use a mop to soak the already leaked water. This will help you prevent the growth of mould in that area.

Step 3: Cover The Leak With A Plastic Trap. (How To Fix Roof Leaks In Heavy Rain)

Things/Tools You’ll Need: A plastic trap, a few nails and hammer, tape.

If the source of the leak is on top of the roof, it’s best to cover it up with a trap. (How To Fix Roof Leaks In Heavy Rain) You can use a plastic sheet that coves the leak and the surrounding area perfectly.

Use nails or waterproof tape to set the trap in its place. Make sure that the trap is secured and won’t fly away with the wind.

While nailing down the trap make sure you do not damage the roof. You can also tape the trap.

Keep in Mind: This is not a single man’s job, also going up on the roof in rain might be risky.

Take Professional Help. (How To Fix Roof Leaks In Heavy Rain)

All the above steps lead to a temporary solution for a leaking roof. Once you have managed to stop the inflow of water, contact your roofing contractor.

A leaking roof may indicate potential problems other than just a leak. It’s best to get a professional roofer on board and have your roof inspected.

Also, a temporary fix may not last long, so a permanent solution is a must.

Conclusion.

I hope this article has given you a detailed idea of How To Fix Roof Leaks In Heavy Rain. If you still have any questions, reach out to us. Our experts are more than happy to answer you. Also, if you are looking for a reliable roofing contractor to fulfil your roofing needs.

LeakStop is a one-stop destination to meet your roofing-related requirements. We offer roof repair, replacement, maintenance, and inspection services all over GVRD (Greater Vancouver Regional District).

We offer a free inspection to first-time clients. Connect with us TODAY at 1 866 777 0084 for immediate assistance!

 

Share the Post:

Related Posts