Things Every Contractor Should Look for During a Roof INSPECTIONS

Roofs are one of the most important components of a home, and they’re typically inspected at least once every few years. However, there are a few things you should look for when conducting a roof inspection that may not be immediately apparent. In this blog post, we’ll discuss some of the key things to look for during a roof inspection, so you can make sure your home is being taken care of properly. From potential problems with your roofing system to potential water damage, read on to learn everything you need to know before your next roof inspection.

1. Your attic’s ventilation

Not only should roof inspectors be looking for signs of roof damage, but they should also be checking for proper attic ventilation. Proper ventilation allows the heat and humidity inside an attic to escape, which can help lower the overall temperature in the attic and protect your belongings from moisture damage. Inspectors should also look for any obstructions that may be preventing air movement in and out of the attic, such as insulation or draperies. If there are any issues with ventilation, contractors may need to install a new roof or ventilate the attic properly.

2. Are there any visible roof leaks or interior water stains?

If you’re a contractor, it’s important to be familiar with the signs of roof leaks and water stains. A leak can cause extensive damage to your property, so it’s important to identify and address any issues as quickly as possible.

One sign of a leak is if water is seeping through the seams of your roofing material. If you see areas where the roofing material is starting to pull away from the walls or framing, this may be a sign of a more serious problem. Water stains also indicate potential leakage issues – if there are water spots on ceilings or walls, it’s likely that rain is leaking into your home. In both cases, it’s important to call in a professional inspection to find and fix the underlying issue.

3. How many layers your roof has

There are a few things to look for when inspecting a roof, and contractors should always be on the lookout for potential problems. To begin with, roofs should have at least three layers of protection: the roofing material itself, an underlayment layer of asphalt or concrete, and finally a protective coating. In addition, look for any signs of leaks or damage. If there are any major concerns, get a professional to inspect the roof for you.

4. The condition of your roof’s decking

Roof inspection is an important step in maintaining your home’s roof. A contractor should look for any signs of damage, such as missing shingles or nails, cracks in the decking, and leaks. If there are any concerns, the contractor can refer the homeowner to a specialist to get the repairs done right.

5. Your roof vents

The roof is one of the most important parts of your home, and it needs to be inspected regularly to make sure it is in good shape. Here are five things to look for when inspecting your roof:

1. Is the roofline straight? If there are any bumps or curves, this could indicate that there is an issue with the shingles or roofing material.

2. Are all the shingles on the roof in place? If one or more shingles are missing, this could lead to water damage or even structural failure.

3. Are the flashing and gutters installed properly? Missing flashing can cause water infiltration into your home, while improperly installed gutters can let rainwater run off your roof and onto the ground.

4. Are the chimneys and downspouts clean? Chimneys and downspouts should be free of leaves, branches, and other debris buildup; if they aren’t, this could lead to clogged pipes and possible structural damage.

5. Is there any sign of water damage on the roof surface? This includes anything from moss growth to visible leaks. If you see any signs of water damage, have your contractor take a closer look at what might be causing it.

6. Your roof shingles

Roofing inspectors should inspect all shingles for obvious damage, missing shingles, and excessive wear. Inspectors should also check for proper flashing and venting (if applicable), proper roof ventilation, and proper roof slope.

7. Your roof’s penetrations and skylights

A roof’s penetrations and skylights are important to inspect during a roof inspection. A roof’s penetrations can be openings through the roof that allow rain and snow to enter the building. Skylights allow in natural light and can help reduce energy costs in a building. Skylights can also allow water damage to the building if they are not properly sealed or if they are damaged in an earthquake.